I/A系列®系统现场控制处理器270 (FCP270)模块安装在底板上并分布
控制系统(DCS)现场总线模块取代APACS+控制和I/O模块，并连接现有的
现场设备通过2mbps的HDLC现场总线和高速以太网网络连接到I/A系列系统
特性
从专有DCS迁移到
最先进的开放式I/A系列系统
高级I/A系列控制，单点
配置
更直接的控制性能比任何
网关设备可以提供
与整个系统替换相比节省的成本
保留现有的流程接口和
布线和最小化工艺停机时间
单一供应商服务和供应。
FCP270
FCP270
概述
I/A系列系统DCS现场总线模块(fbm)
用于APACS+™自动化系统的迁移
由西门子®能源与自动化制造，
fbm直接插入
成现有的电子窝来替代工艺
输入输出模块。
I/A系列系统DCS FBM家族提供了一个
从APACS+进程I/O迁移路径
组件到I/A系列显示和监控
功能。没有额外的通信设备
必需的。没有多厂商通信软件
需要许可。
I/A系列系统DCS FBM家族取代
APACS+ I/O模块。一旦整合，过程
完全由先进的I/A系列控制
算法集。
I/A系列系统DCS FBM产品包括
连接器，使集成的原始过程
信号到I/A系列系统，同时保持现场
接口和布线。它提供对所有进程的访问
信号连接到APACS+系统
提供Field之间的连接
终端组件(fta)和I/A系列
系统。所有过程信号完全集成
进入I/A系列系统通过使用的过程
数据显示，历史，报警和
控制。
操作员功能和工程配置如下
由I/A系列系统完成
I/A系列操作员工作站。因为所有的过程
值成为I/A系列系统的一部分
配置数据由系统维护
本机I/A系列配置。
此迁移路径提供了所有的工厂操作
I/A系列系统的强大和灵活性。
FCP270
I/A Series® system Field Control Processor 270 (FCP270) modules mounted on a baseplate and distributed
control system (DCS) Fieldbus Modules replace the APACS+ Control and I/O modules and connect existing
field devices to the I/A Series system via a 2 Mbps HDLC Fieldbus and high-speed Ethernet network
FEATURES
Migration from proprietary DCS to a
state-of-the-art open I/A Series system
Advanced I/A Series control with a single point of
configuration
More direct control performance than any
gateway device could offer
Cost savings over total system replacement by
preserving the existing process interface and
wiring and minimizing process downtime
Single vendor service and supply.
OVERVIEW
The I/A Series system DCS Fieldbus Modules (FBMs)
are for migration of APACS+™ automation systems
manufactured by Siemens® Energy & Automation,
Inc. and Moore Products Co. The FBMs plug directly
into an existing electronic nest to replace process
input and output modules.
The I/A Series system DCS FBM family provides a
migration path from APACS+ process I/O
components to I/A Series display and supervisory
functions. No additional communication devices are
required. No multi-vendor communication software
licensing is required.
The I/A Series system DCS FBM family replaces the
APACS+ I/O modules. Once integrated, the process
is controlled entirely by the advanced I/A Series
algorithm set.
The I/A Series system DCS FBM product includes
connectors to enable integration of original process
signals to I/A Series systems while keeping the field
interface and wiring. It provides access to all process
signals connected to the APACS+ system by
providing the connection between the Field
Termination Assemblies (FTAs) and the I/A Series
system. All process signals become fully integrated
into the I/A Series system through the use of process
data for operator display, history, alarming and
control.
Operator functions and engineering configuration are
accomplished by the I/A Series system at any
I/A Series operator workstation. Because all process
values become part of the I/A Series system, all
configuration data is maintained by the system as
native I/A Series configurations.
This migration path provides plant operations with all
the power and flexibility of the I/A Series system.
There are no reviews yet.