IC693CPU374 GE CPU模块

IC693CPU374是GE发那科90-30系列的可编程逻辑控制器(PLC)模块。该模块是一个处理器模块，用于承载用户程序，通过嵌入式通信端口执行与处理器之间的逻辑和管理数据交换。

IC693CPU374也可以称为控制器。该控制器内置微处理器，内置586处理器，处理速度为133 MHz。它有一个典型的扫描速率0.15毫秒每1K布尔接触逻辑。该控制器模块具有单一槽位宽度，可安装在90-30 PLC机架上。

IC693CPU374的用户内存为240KB。它有两个以太网通信端口，支持10/100 Mbps的传输速度，具有自动感应能力。这些端口使控制器能够连接到以太网网络，以便与编程工作站(如台式机或笔记本电脑)通信，与人机界面(HMI)和监控和数据采集(SCADA)系统通信，以及用于消息传递功能的其他处理器。本控制器也可以通过标准电源或大容量电源上的RS485通信接口进行通信。

该控制器接受使用各种编程软件应用程序开发的用户程序，如VersaPro 2.03或更高版本，simplicity Machine Edition Logic Developer 2.60或更高版本和控制软件2.50或更高版本。使用已有的用户程序对控制器进行在线编辑时，请使用相同版本或更高版本的软件。

IC693CPU374

IC693CPU374 CPU的处理器速度为133兆赫兹，总用户内存为240 KB。程序存储器可根据应用程序要求配置，它包括可配置范围为128至32,640字的寄存器存储器，以及用于模拟输入和模拟输出的可配置存储器。系统寄存器的内存支持多达28个单词，用户可以设置大约2000个计时器和计数器。

IC693CPU374 CPU采用AMD SC520类型的80386EX处理器，它有2个内置以太网端口，允许10/100 base-T/TX通信。特色以太网端口通过RJ-45连接器连接。该单元还支持电源上的RS-485端口，并允许通过SNP和SNPX协议进行通信。除此之外，该单元还支持几种常用的程序存储设备。

IC693CPU374

The IC693CPU374 is a programmable logic controller (PLC) module of the GE Fanuc 90-30 series. The module is a processor module for hosting user programs that perform logical and management data exchange with the processor via an embedded communication port.

IC693CPU374 can also be called controller. The controller has a built-in microprocessor with a built-in 586 processor and a processing speed of 133 MHz. It has a typical scan rate of 0.15 ms per 1K Boolean contact logic. The controller module has a single slot width and can be mounted on a 90-30 PLC rack.

The user memory of IC693CPU374 is 240KB. It has two Ethernet communication ports, supports 10/100 Mbps transmission speeds, and has automatic sensing capabilities. These ports enable the controller to connect to an Ethernet network to communicate with programming workstations such as desktop or laptop computers, with human machine interface (HMI) and supervisory control and data acquisition (SCADA) systems, and with other processors for messaging functions. The controller can also communicate via the RS485 communication interface on a standard power supply or a large capacity power supply.

The controller accepts user programs developed using a variety of programming software applications, such as VersaPro 2.03 or later, simplicity Machine Edition Logic Developer 2.60 or later, and Control software 2.50 or later. When using an existing user program to edit the controller online, use the same or later version of the software.

The IC693CPU374 CPU has a processor speed of 133 megahertz and a total user memory of 240 KB. Program memory can be configured according to application requirements, and it includes register memory with a configurable range of 128 to 32,640 words, as well as configurable memory for analog input and analog output. The memory of the system register supports up to 28 words, and users can set about 2,000 timers and counters.

The IC693CPU374 CPU uses an 80386EX processor of the AMD SC520 type, which has 2 built-in Ethernet ports that allow 10/100 base-T/TX communication. Featured Ethernet ports are connected through RJ-45 connectors. The unit also supports an RS-485 port on the power supply and allows communication via SNP and SNPX protocols. In addition, the unit also supports several commonly used program storage devices.

IC693CPU374