8406-113 EGCP-3发动机发电机控制包

型号8406-113属于伍德沃德EGCP-3发动机发电机控制包，负荷分担(LS)模型系列。这种基于微处理器的单元被设计为与其他LS单元一起使用或一起使用。8406-113的额定输入电压为18v dc ~ 32v dc，工作温度范围为-20℃~ +70℃。

LS型号具有键盘和显示屏界面，其中包括两个背光LCD屏幕，使用户可以同时监控和调整相关参数。这些屏幕显示8行状态信息，可选择4行配置或告警日志信息。

使用前，8406-113必须通过“首次启动菜单”进行配置;在引擎运行时无法编辑这些项。对于标准操作，8406-113配置点可从前面板显示。其他配置点(连同标准配置点)可以通过ServLink通信串行链路从Watch Window软件访问。

该控制单元有九个状态菜单，便于监控和故障排除。菜单包括:“系统状态”、“发动机状态”、“发电机状态”、“同步器状态”、“KW负载状态”、“PF/KVAR状态”、“I/O状态”、“顺序状态”和“ATS状态”(请注意:LS型号无转换开关功能)。如果该单元设置与本地系统总线绑定到市电，并且MC单元需要执行ATS功能)。

额外的规格和说明可以在EGCP-3发动机发电机控制包LS(负载共享)型号8406-113手动26194中在线找到。

8406-113

Model 8406-113 falls under the Woodward EGCP-3 Engine Generator Control Package, Load Sharing (LS) model series. This microprocessor-based unit is designed to be used along with or together with other LS units. The 8406-113 is rated with an input voltage of 18-32 V dc, and rated for an operating temperature range of –20 to +70 °C.

This LS model has a keypad and display screen interface, which includes two backlit LCD screens, enabling users to simultaneously monitor and tune related parameters. These screens display eight lines of status information, with the option of four lines of configuration or alarm log information.

Before use, the 8406-113 must be configured through the First Time Startup Menu; these items cannot be edited while the engine is running. For standard operations, the 8406-113 configuration points are available from the front panel display. Additional configuration points (along with the standard ones) may be accessed from Watch Window software through the ServLink communications serial link.

This control unit has nine status menus to allow for easy monitoring and troubleshooting. These menus are System Status, Engine Status, Generator Status, Synchronizer Status, KW Load Status, PF/KVAR Status, I/O Status, Sequence Status, and ATS Status (please note: the LS models do not have any Transfer Switch functions. If the unit is set up with the local system bus tied to the mains, and MC unit is required to perform the ATS function).

Additional specs and instructions may be found online in the EGCP-3 Engine Generator Control Package LS (Load Sharing) Model 8406-113 Manual 26194.

8406-113

8406-113