UT35A-001-11-00 调节仪 标准装载梯形图功能

UT35A-001-11-00是一种调节仪，具有以下特点：
采用14段变色（红白切换）彩色LCD显示，使用两个5位高分辨率显示屏，可清晰地显示易于读取的字母。
操作简单，使用导航键（SET/ENTER和上/下/左/右箭头键）可以简单地进行设置。
深度65mm，也可以安装在薄小的现场表盘上。
标准装载梯形图功能，可以构建和修改复杂的控制系统。
UT35A-001-11-00调节仪的使用方法相对简单，具体如下：
打开调节仪的电源，等待仪器自检完毕并进入主界面。
使用导航键在LCD显示屏上进行操作，通过SET/ENTER键进入需要设置的参数项。
使用上/下/左/右箭头键对参数进行调节，并根据需要进行设置。
当参数设置完毕后，按下SET/ENTER键保存并退出。
在使用过程中，可以通过观察LCD显示屏上的显示内容来监控参数的变化和仪器的运行状态。
如有需要，可以随时使用上/下/左/右箭头键对参数进行微调或重新设置。
当仪器需要关闭时，请先退出主界面并关闭电源。

UT35A-001-11-00

The UT35A-001-11-00 is a regulator with the following features:
Featuring a 14-segment color-changing (red and white switching) color LCD display, easy-to-read letters are clearly displayed using two 5-bit high-resolution displays.
The operation is simple, using the navigation keys (SET/ENTER and up/down/left/right arrow keys) can be easily set up.
Depth 65mm, can also be mounted on thin small field dial.
The standard loading ladder feature allows you to build and modify complex control systems.
The use of the UT35A-001-11-00 regulator is relatively simple, as follows:
Turn on the power supply of the regulator, wait for the instrument to complete self-test and enter the main interface.
Use navigation keys to perform operations on the LCD, and press SET/ENTER to enter the parameter to be set.
Use the up/down/left/right arrow keys to adjust the parameters and set them as needed.
When the parameters are SET, press the SET/ENTER key to save and exit.
In the process of use, you can monitor the change of parameters and the operating status of the instrument by observing the display content on the LCD display.
If necessary, you can use the up/down/left/right arrow keys to fine-tune or reset the parameters at any time.
When the device needs to be turned off, exit the main screen and turn off the power.

其他型号推荐：