2090-CSWM1DF-14AA09 专为Kinetix 5500伺服驱动器设计

基本细节:2090-CSWM1DF-14AA09 专为Kinetix 5500伺服驱动器设计

2090-CSWM1DF-14AA09电缆以线圈的形式储存和运输。在拉直电缆之前，电缆保持这种形状。要拉直电缆，可以从其中点悬挂一根短电缆，或将一根长电缆沿直线放在地板上。在接下来的24小时内，电缆中的任何线圈都将被拉直。这种做法使电缆更容易安装。

单根电缆使用的电缆技术是相同的，无论目录号如何。每根电缆的不同之处在于引线准备和反馈导体端子..2090-CSxM1DF电缆导体具有飞引线和引线制备，专为Kinetix 5500伺服驱动器设计，不需要现场铅准备.2090-CSxM1DE电缆包括2198-KITCON-DSL连接器套件。该套件与反馈导体预组装，飞引线功率导体的引线准备是专门为Kinetix 5700伺服驱动器设计的。不需要现场铅准备。
.2090-CSxM1DG电缆导体具有飞引线和引线制备，专为Kinetix 5500或Kinetix 5700同服驱动器设计。不需要现场引线准备，但是，2090-CSxM1DG电缆引线比2090-CSxM1DF电缆引线长，以适应任一驱动器系列。

这些数字说明了如何测量弯曲半径和电缆弯曲的地方可以在单电机电缆上。在系统安装过程中，布放电缆时，请与电缆引脚和规格表配合使用。
为了满足Kinetix 5700伺服驱动系统上的电机制动电路的当前要求，电缆长度超过50米(164英尺)，2090-CSBM1DE(B系列)电缆可与18 AWG制武导体一起使用。B系列电缆设计用于电缆长度从51米(167英尺)到90米(294英尺)的应用，可提供1.0米(3.3英尺)的增量。对于需要1.0米(3.3英尺.)..50米(164英尺)电缆长度的Kinetix 5700驱动系统，2090-CSBM1DE(A系列)电缆仍然可用

2090-CSWM1DF-14AA09

Cables are stored and transported in the form of coils. The cable remains in this shape until it is straightened. To straighten a cable, either hang a short cable from its center point or place a long cable on the floor in a straight line. Over the next 24 hours, any coils in the cable will be straightened. This practice makes the cable easier to install.

The cable technology used by a single cable is the same regardless of the directory number. Each cable is different in lead preparation and feedback conductor terminals… The 2090-CSxM1DF cable conductor features fly leads and lead preparation, designed for Kinetix 5500 servo drives and does not require field lead preparation. The 2090-CSxM1DE cable includes the 2198-KITCON-DSL connector kit. The kit is pre-assembled with feedback conductors, and the lead preparation of the fly Lead power conductor is specifically designed for Kinetix 5700 servo drives. No field lead preparation required.
The.2090-CSXM1DG cable conductor has fly leads and lead preparation and is designed for Kinetix 5500 or Kinetix 5700 co-service drives. Field lead preparation is not required, however, the 2090-CSxM1DG cable leads are longer than the 2090-CSxM1DF cable leads to accommodate either drive family.

These figures illustrate how to measure the bending radius and where the cable can bend on a single motor cable. When routing cables during system installation, use the cable pins and specification table together.
To meet current requirements for motor brake circuits on Kinetix 5700 servo drive systems with cable lengths exceeding 50 meters (164 ft), the 2090-CSBM1DE(B Series) cable can be used with 18 AWG weapon conductors. The B-Series cables are designed for applications with cable lengths from 51 meters (167 ft) to 90 meters (294 ft) and are available in 1.0 meter (3.3 ft) increments. For 1.0 m (3.3 ft.) required. .. 50 m (164 ft) cable length Kinetix 5700 drive system, 2090-CSBM1DE(A Series) cable is still available.

如果您需要查询或购买，请将产品型号发送到我的电子邮件或直接致电我

销售经理:何经理

手机: + 86 18005021035

邮箱: 18005021035@163.com

▲更多相关型号:2090-CSWM1DF-14AA09 专为Kinetix 5500伺服驱动器设计