IC200MDL650 高密度分立式输入模块 支持正负逻辑接线配置

基本细节:IC200MDL650 高密度分立式输入模块 支持正负逻辑接线配置

该IC200MDL650是 VersaMax I/O 系列的 32 点分立式输入模块，该系列以前由 GE Intelligent Platforms 生产，现在隶属于 Emerson Automation。该模块具有三十二 （32） 个输入通道，支持正负逻辑接线配置，分为四 （4） 组，每组八 （8） 个通道。该模块的每个输入通道的额定电压为 24 VDC，输入信号范围为 0-30 VDC，输入电流为 2.0 – 5.5 mA。该模块的背板电流消耗为 50 mA
该IC200MDL650是GE VersaMax I/O平台的高密度分立式输入模块。该模块具有三十二 （32） 个输入通道，支持正负逻辑接线配置，分为四 （4） 组，每组八 （8） 个输入通道。该模块具有额定 250 VAC 的组间隔离、连续和 1500 VAC 的连续隔离，持续时间为 1 分钟。这种类型的模块通常用于各种工业应用，主要用于集成输入设备，如按钮、辅助触点、限位开关、液位开关、接近传感器和类似的二进制或开/关设备。
IC200MDL650的输入通道设计为接受 0-30 VDC 的输入电压信号范围，标称输入为 24 VDC。该模块的导通状态电压为 +15 至 +30 VDC，关断状态电压为 0 至 +5 VDC，而导通状态和关断状态电流额定值分别为 w.0 至 5.5 mA 和 0 至 0.5 mA。对于开到关和关到开的信道状态转换，响应时间通常为最大 0.5 ms。此外，输入通道还提供可配置的输入滤波时间，可用于消除去抖动、误报和误负信号。具体而言，可用的过滤器设置为 0 ms、1.0 ms 和 7.0 ms，默认设置为 1.0 ms。
该模块安装在标准DIN导轨上，支持水平和垂直方向。它配有单独的通道状态 LED 指示灯，用于描述每个输入通道的驱动状态。
GE Fanuc Versamax IC200MDL650 分立输入模块设计用于直流输入设备。该模块的输入特性与各种输入设备兼容，可配置为正逻辑或负逻辑输入。IC200MDL650分立式输入模块从 PLC 背板汲取最大 50 毫安的电流以上电。此 24 伏直流输入模块在 24 伏直流电下没有任何降额，其确切功能取决于外部电压、它所连接的 DIN 导轨的方向以及周围的环境温度。每个输入点都有一个 LED 指示灯，用于提供输入通道的开/关状态。输入与用户提供的输入设备兼容，例如传感器、限位开关和按钮。
IC200MDL650离散输入模块是一个分布式输入模块，用于扩展PLC应用。其 CPU 软件配置功能允许用户通过可配置的滤波时间在开关边界和噪声尖峰条件下进行补偿。它还提供 0.5 毫秒的开断响应时间以及 1.5 毫秒的总滤波器响应时间。模块的输入电压为 24 伏直流标称值，工作电压范围为 0 至 30 伏直流。该模块设计紧凑，可实现方便且节省空间的安装设施。它可以垂直或水平安装在DIN导轨上。此外，还提供多种 I/O 载体，使安装、背板通信和现场布线变得简单。

IC200MDL650

The IC200MDL650 is a 32-point vertical input module for the VersaMax I/O family, formerly produced by GE Intelligent Platforms and now owned by Emerson Automation. The module has thirty-two (32) input channels, supports positive and negative logic wiring configuration, and is divided into four (4) groups, each group of eight (8) channels. Each input channel of the module has a rated voltage of 24 VDC, an input signal range of 0-30 VDC, and an input current of 2.0-5.5 mA. The backplane current consumption of the module is 50 mA
The IC200MDL650 is a high-density discrete input module for the GE VersaMax I/O platform. The module has thirty-two (32) input channels, supports positive and negative logic wiring configuration, is divided into four (4) groups, each group of eight (8) input channels. The module is rated for 250 VAC inter-group isolation, continuous and 1500 VAC continuous isolation with a duration of 1 minute. This type of module is commonly used in a variety of industrial applications, primarily for integrating input devices such as buttons, auxiliary contacts, limit switches, level switches, proximity sensors, and similar binary or on/off devices.
The input channel of the IC200MDL650 is designed to accept an input voltage signal range of 0-30 VDC, with a nominal input of 24 VDC. The module has on-state voltages of +15 to +30 VDC and off state voltages of 0 to +5 VDC, while on-state and off state current ratings are w.0 to 5.5 mA and 0 to 0.5 mA, respectively. For on-off and off-on channel state transitions, the response time is typically a maximum of 0.5 ms. In addition, the input channel provides configurable input filtering times that can be used to eliminate de-jitter, false positives, and false negative signals. Specifically, the available filter Settings are 0 ms, 1.0 ms, and 7.0 ms, with the default setting being 1.0 ms.
The module is mounted on a standard DIN rail and supports horizontal and vertical orientations. It is equipped with a separate channel status LED indicator that describes the drive status of each input channel.
The GE Fanuc Versamax IC200MDL650 discrete input module is designed for DC input devices. The input characteristics of the module are compatible with various input devices and can be configured for positive or negative logic inputs. The IC200MDL650 split input module draws up to 50 MA of current from the PLC backplane. This 24 volt DC input module does not have any derating at 24 volts DC, and its exact function depends on the external voltage, the direction of the DIN rail to which it is attached, and the ambient temperature. Each input point has an LED indicator that provides the on/off status of the input channel. Inputs are compatible with user-supplied input devices, such as sensors, limit switches and buttons.
The IC200MDL650 discrete input module is a distributed input module for expanding PLC applications. Its CPU software configuration function allows users to compensate for switching boundaries and noise spikes with configurable filtering times. It also provides a breaking response time of 0.5 ms and a total filter response time of 1.5 ms. The input voltage of the module is a nominal value of 24 volts DC and the operating voltage range is 0 to 30 volts DC. The compact design of the module enables convenient and space-saving installation facilities. It can be mounted vertically or horizontally on DIN rails. In addition, a variety of I/O carriers are available to make installation, backplane communication and field wiring simple.

如果您需要查询或购买，请将产品型号发送到我的电子邮件或直接致电我

销售经理:何经理

手机: + 86 18005021035

邮箱: 18005021035@163.com

与成都阳光熹禾合作我们提供一流的服务，实现更快的速度，交付多样化的零件!

1.在24小时内及时回复您

2.交货时间快

3.最好的服务，合理的价格

4.在生产线上工作多年，有良好的口碑

▲更多相关型号: IC200MDL650 高密度分立式输入模块 支持正负逻辑接线配置