基本细节:1769-IG16 紧凑型I/O模块 配有CompactLogix™控制器
1769- ig16紧凑型I/O™模块可用于以下应用:
•配有CompactLogix™控制器
•用于MicroLogix™1500控制器组件中的扩展I/O
•在带有1769-ADN DeviceNet适配器的程序集中
•在一个装配1769-AENTR以太网适配器。
除非连接到MicroLogix 1500底座,否则每组I/O模块必须包含自己的电源。
将I/O模块安装在带有两个安装螺钉的面板上或DIN导轨上。这些模块机械地锁在一起
采用舌槽式设计,并有一个集成的通信总线,由模块连接到模块
可移动的总线连接器
每个I/O模块包括一个内置的可移动终端块与手指安全盖连接到I/O传感器和执行器。端子排在模块前面的一扇门后面。I/O接线可以从模块下方布线到I/O终端。
如果您的电感装置与硬触点(如按钮或选择开关)串联或并联,则额外的抑制尤为重要。在电感装置的线圈上直接加一个抑制装置。该抑制装置减少了由于中断到该装置的电流而引起的电压瞬变的影响,并延长了开关触点的寿命。
大多数输出模块都内置浪涌抑制,以减少高压瞬变的影响。使用一个额外的抑制装置,如果一个输出被用来控制电感装置,如继电器,电机启动器,螺线管,或电机

1769-IG16
The 1769-ig16 compact I/O™ module can be used in the following applications:
• With CompactLogix™ controller
• For extended I/O in MicroLogix™1500 controller components
• In assemblies with a 1769-ADN DeviceNet adapter
• An assembled 1769-AENTR Ethernet adapter.
Unless connected to the MicroLogix 1500 dock, each set of I/O modules must contain its own power supply.
Mount the I/O module on a panel with two mounting screws or on a DIN rail. The modules are mechanically locked together
It has a tongue-and-groove design and has an integrated communication bus that is connected from module to module
Removable bus connector
Each I/O module includes a built-in removable terminal block with a finger safety cover connected to the I/O sensor and actuator. The terminals are lined behind a door on the front of the module. I/O wiring can be routed from the bottom of the module to the I/O terminal.
Additional suppression is especially important if your inductive device is connected in series or parallel to hard contacts, such as buttons or select switches. Add a suppressor directly to the coil of the inductor. The suppressor reduces the effects of voltage transients caused by interrupting the current to the device and extends the life of the switching contact.
Most output modules have built-in surge suppression to reduce the effects of high voltage transients. Use an additional suppression device if an output is used to control an inductive device such as a relay, motor starter, solenoid, or motor
如果您需要查询或购买,请将产品型号发送到我的电子邮件或直接致电我
销售经理:何经理
手机: + 86 18005021035
邮箱: 18005021035@163.com
与成都阳光熹禾合作我们提供一流的服务,实现更快的速度,交付多样化的零件!
1.在24小时内及时回复您
2.交货时间快
3.最好的服务,合理的价格
4.在生产线上工作多年,有良好的口碑
▲更多相关型号:1769-IG16 紧凑型I/O模块 配有CompactLogix™控制器
FEM100 P0973CA现场总线扩展模块FOXBORO | FBM233 P0926GX以太网通信FOXBORO |
FCP280 RH924YA现场控制处理器FOXBORO | FBM232 P0926GW现场设备系统集成模块FOXBORO |
FCP270 P0917YZ现场控制处理器FOXBORO | FBM230 P0926GU Modbus Master (Serial and TCP/IP) Driver FOXBORO |
FCM100ET现场设备系统集成模块FOXBORO | FBM219 RH916RH端接组件型号FOXBORO |
fcm10ep0914ym现场总线通信模块 | Fbm222 profibus dp模块 |
FCM10EF系列现场总线通信模块FOXBORO | PROFIBUS-DP通信接口模块 |
fcm100ep0972za现场通信模块与光纤FOXBORO | FBM224 P0926GG外部来源,离散输出接口模块FOXBORO |
FBMSVH电液伺服卡FOXBORO | FBM227 P0927AC离散输入接口模块FOXBORO |
FBMSSW电液伺服卡FOXBORO | TRICONEX 3002脉冲输入终端板 |
FBM242 RH916TA外源,离散输出接口模块FOXBORO | Triconex 3005主处理器模块 |
FBM241/c/d离散I/O模块 | TRICONEX 3008主处理器 |
FBM240离散输出和离散输入模块FOXBORO | TRICONEX 3201通讯模块 |
RH914XS通道隔离输出接口模块 | TRICONEX 3101主处理器模块 |
There are no reviews yet.