Call us 24/7+86 18859254943
Call us 24/7+86 18859254943

SCXI-1141 低通滤波器输入模块/采样率高达 333 kS/s

In stock

SCXI-1141(部件号:776572-41)具有8个低通椭圆滤波器和8个差分输入放大器。

该低通滤波器输入模块可用于低通滤波和抗混叠应用,以及通用信号放大和滤波。该模块也建议用于急剧的过滤器滚降。

所有八个通道必须设置为相同的截止频率,但用户可以通过编程方式绕过每个通道的低通滤波器。

该器件的采样率高达 333 kS/s,衰减率为 135 dB/倍频程。NI SCXI-1141 可 与 National Instruments E/M 系列 DAQ 仪器配合使用 。

一台DAQ仪器可用于控制机箱中的几个SCXI-1141模块与其他SCXI模块的组合。

  • 电话/Phone:18005021035 (微信同号)
  • 邮箱/Email:18005021035@163.com
  • QQ:2196901835
SKU: SCXI-1141

产品介绍:

SCXI-1141 低通滤波器输入模块

SCXI-1141(部件号:776572-41)具有8个低通椭圆滤波器和8个差分输入放大器。该低通滤波器输入模块可用于低通滤波和抗混叠应用,以及通用信号放大和滤波。该模块也建议用于急剧的过滤器滚降。所有八个通道必须设置为相同的截止频率,但用户可以通过编程方式绕过每个通道的低通滤波器。该器件的采样率高达 333 kS/s,衰减率为 135 dB/倍频程。NI SCXI-1141 可 与 National Instruments E/M 系列 DAQ 仪器配合使用 。一台DAQ仪器可用于控制机箱中的几个SCXI-1141模块与其他SCXI模块的组合。

SCXI-1304 和 SCXI-1305 屏蔽接线端子具有螺丝端子,可轻松将信号连接到 SCXI-1141 模块。SCXI-1304 和 SCXI-1305 是建议与本模块一起使用的接线端子。这些接线端子具有交流或直流耦合以及浮动或接地参考信号所需的所有电路。

NI SCXI-1141 低通滤波器 输入 模 块 可 利用 模拟 滤波 器 和 开关 电容 滤波 器 实现 10,000 个 分 立 软件 可 编程 截止 频率 的 多功能性, 同时 保持 常规 持续 时间 活动 滤波 器 的 低 噪声 性能。该模块还具有外部时钟输入和输出,允许用户在跟踪滤波器应用中使用外部时钟设置滤波器截止频率。

将自动归零模式指定为“一”将有助于提高测量的精确度。当自动归零被激活时,SCXI-1141模块的输入在内部接地。驱动程序在任务开始时完成测量,然后从所有即将到来的测量中减去测量的偏移量。

SCXI-1141使用NI-DAQmx驱动程序软件运行,该软件与LabVIEW或LabWindows/CVI等软件包或应用开发环境(ADE)兼容。它可以使用Measurement & Automation Explorer(MAX)工具进行配置。NI 设备 尺寸 为 1.2 x 6.8 x 8.0 英寸。在物理维度上。

SCXI-1141

英语介绍:

SCXI-1141 low-pass filter input module

The SCXI-1141 (Part number: 776572-41) has eight low-pass elliptic filters and eight differential input amplifiers. The low-pass filter input module can be used for low-pass filtering and anti-aliasing applications, as well as general-purpose signal amplification and filtering. The module is also recommended for sharp filter roll-downs. All eight channels must be set to the same cutoff frequency, but users can programmatically bypass the low-pass filter for each channel. The device has a sampling rate of up to 333 kS/s and a attenuation rate of 135 dB/ octave. The NI SCXI-1141 can be used with National Instruments E/M series DAQ instruments. A single DAQ instrument can be used to control several SCXI-1141 modules in the chassis in combination with other SCXI modules.

The SCXI-1304 and SCXI-1305 shielded terminals have screw terminals for easy signal connection to the SCXI-1141 module. SCXI-1304 and SCXI-1305 are the terminals recommended for use with this module. These terminals have all the circuits required for AC or DC coupling and floating or ground reference signals.

The NI SCXI-1141 low-pass filter input module enables the versatility of 10,000 split-software programmable cutoff frequencies using analog filters and switched capacitor filters. At the same time, the low noise performance of the conventional duration active filter is maintained. The module also has an external clock input and output, allowing users to set the filter cutoff frequency using an external clock in tracking filter applications.

Specifying the autozero mode as “one” will help improve the accuracy of the measurement. When automatic zeroing is activated, the input of the SCXI-1141 module is internally grounded. The driver completes the measurement at the beginning of the task and then subtracts the offset of the measurement from all upcoming measurements.

The SCXI-1141 runs with NI-DAQmx driver software, which is compatible with packages or application development environments (ades) such as LabVIEW or LabWindows/CVI. It can be configured using the Measurement & Automation Explorer (MAX) tool. NI devices measure 1.2 x 6.8 x 8.0 inches. In the physical dimension.

联系我们

销售经理:BeiLin
电话: +86 18005021035
电子邮件:18005021035@163.com
营业时间:我们提供 24/7 全天候在线支持
地址:成都高新区天益街北巷52号附14号2层

关于成都阳光熹禾

成都阳光熹禾电气有限公司专业销售世界各大电气品牌产品产品海外直接采购,正品库存,价格优惠售后保修,型号齐全,一样的产品,不一样的价格与服务。

大量供应原装进口DCS系统配件,PLC系统配件。

主营:ABB、GE发那科、Bentl本特利、Triconex英维思、Woodward伍德沃德、Foxboro福克斯波罗、Westinghouse西屋/Emerson艾默生、

Reliance瑞恩、SchneiderModicon施耐德莫迪康、A-B、HIMA黑马、Motorola摩托罗拉、Kollmorgen科尔摩根Bosch/Rexroth/博世力上乐,

NI,YOKOGAWA横河,等各大品牌的DCS系统配件,机器人系统配件,大型伺服系统停产备件。

⇒常见问题和联系方式: 

问:您是贸易公司还是制造商?

答: 我们是一家贸易公司。

问: 你们的交货时间是多久?

答: 如果我们有库存,通常需要一到七天。如果货物没有库存,则需要协商。

问: 贵公司是否提供样品?它是免费的还是额外收费的?

答: 这取决于您需要的商品和您订购的数量。

问: 你们的付款条件是什么?

答: 发货前 100% T/T。如果数量大,我们可以协商。

公司服务:

1.快速交货(库存产品1-7天发货)

2.经验丰富(10年以上销售经验)

3.库存量大(各种品牌和海外仓)

4.质量保险(1年保修的产品状况清晰)

运输 

1.对于库存物品,我们将在收到付款后7 天内运送给您

2.我们可以通过 DHL、UPS、FEDEX、TNT 和 EMS 运送到世界各地。

3.如果您有运输代理,请在发货前告诉我们。

4.我们将用坚固的盒子包装零件,如果您有任何特殊需求,请通知我们。

5.我们通常在下午4:30之前发货,发货后我们会将跟踪号发送给您。收到包裹需要7~15天。

6.当您收到包裹时,请发邮件给我们。

7.在询问运费时,请包括所有信息,否则会减慢流程。

1)你们的邮政编码是什么?

2)如果你有公司名称和你的名字,你的公司名称是什么?

3)您的电话号码和分机号(如果有)是什么?

Customers reviews

There are no reviews yet.

Be the first to review “SCXI-1141 低通滤波器输入模块/采样率高达 333 kS/s”

您的邮箱地址不会被公开。 必填项已用 * 标注

Search for products

Back to Top
Product has been added to your cart