AN-X2-AB-DHRIO  PROSOFT 远程I/O输入输出网关

AN-X2-AB-DHRIO网关旨在帮助客户启动分阶段迁移方法，以更换或升级传统远程I/O PLC、HMI、驱动器或Flex I/O适配器。这些解决方案可以通过在初始配置期间选择相应的操作模式来实现。安-X2-AB-DHRIO有一个内置的网络服务器，可以显示诊断数据、配置、上传配置文件和设置操作模式。
AN-X2-AB-DHRI0是一种通信模块，由艾伦-布拉德利合作伙伴公司Prosoft Technology制造，这款通信设备小巧紧凑，支持桌面或DIN导轨安装，它允许现代可编程自动化控制器(PAC)如Allen-Bradley的Contrologix和CompactLogix控制器与采用传统远程/0(RI0)和Data HighwayPlus(DH+)通信协议的设备进行通信。
AN-X2-AB-DHRIO有-11个以大网/P通信接口，支持10/10 mps数据传输速率，此端将PAC瑞连接到网关，而安X2 a B- DHRI0可用的3针菲尼克斯网络连接器允许设备的菊花连接，如艾伦-布拉德利的PLCSLC 500、

AN-X2-AB-DHRIO

PanelView、驱动器和Flex /0适配器模块。该通信接口支持可配置的数据传输速率，包括57.6、115.2和230.4K波特。它还带有另一个3针凤凰连接器，用于端接外部24伏直流电源AN-X2-AB-DHRIO还配有内置网络服务器，允许远程监控和配置该网关。可通过web服务器启动的其他支持操作包括诊断数据显示、配置、上传配置文件和操作模式设置。这可以通过标准的网络浏览器来完成AN-X2-AB-DHRIO非常活合集成到传统设备的现代控制系统中，以及经济高效地移植成激和过时的产品。它允许继续使用这些设备，而不需要完全更换，为客户提供了一个灵活和实用的现有自动化要求的替代解决方案。AN-X2-AB-DHRIO模块是艾-布德天 以大网/P至DH+R0网络连接器，Contr/Lox系列的这通信块有助于将ControLogx PLC作兼容设备连接到AIlen-Bradlev远程/0网络。通信模块带有1/0通道，它支持从57.6到230.4千波特的所有远程/0波特率，该模块支持队0到76八进制的架号。该实用程序将远程/0数据映射到Contrologx计划数据。该模块通过使用以太网上的预定连接与Controllogix处理器连接。通信模块的前面有两个LED指示灯，用于显示以太网的连接状态，另一个LED指示灯用于显示模块的内部通信状态艾伦-布拉德利安-X2-AB-DHRI0 ConroLox通信模块的工作温度应设置在0至50得氏度之间。可以使用DN导轨轻松安装、安X2 AB DHRIO模块的定功耗为200室安，额定电压为12伏DC或100毫安，额定电压为24伏DC，该通信模块的最大功耗额定值为2.4瓦，安X2 AB DHRIO模块有助于取代现有的远程/O PLC。它有助于在不中断现有控制系统的情况下构建新的控制器程序，并最大限度地减少停机时间。它带有一个自动配置实用程席，可以发现波特率并映射察散/0以减少配置错误、通信模块配有一R 45 10/100 Mbps以太网端口，一ohenix 3针电源连接器和一Phoenix 3针网络连接器。

AN-X2-AB-DHRIO

The AN-X2-AB-DHRIO gateway is designed to help customers initiate a phased migration approach to replace or upgrade a traditional remote I/O PLC, HMI, drive, or Flex I/O adapter. These solutions can be implemented by selecting the appropriate mode of operation during initial configuration. The An-X2-AB-DHrio has a built-in web server that can display diagnostic data, configure, upload configuration files, and set operating modes.
The AN-X2-AB-DHRI0 is a communication module manufactured by Allen-Bradley partner company Prosoft Technology, a compact communication device that can be mounted on a desktop or DIN rail. It allows modern programmable automation controllers (PACs) such as Allene-Bradley’s Contrologix and CompactLogix controllers to communicate with devices that employ traditional Remote /0(RI0) and Data HighwayPlus(DH+) communication protocols.
AN-X2-AB-DHRIO has -11 large network /P communication interfaces, supporting 10/10 mps data transfer rates, this end connects the PAC Ray to the gateway, while the available 3-pin Phoenix network connector on the AnX2-A-B-DHRI0 allows the chrysanthemum connection of the device. Such as Allen Bradley’s PLCSLC 500, PanelView, drive and Flex /0 adapter modules. The communication interface supports configurable data transfer rates, including 57.6, 115.2 and 230.4K baud. It also comes with another 3-pin Phoenix connector for terminating AN external 24-volt DC power supply and the AN-X2-AB-DHRIO also comes with a built-in network server that allows remote monitoring and configuration of this gateway. Other supported actions that can be initiated through the web server include diagnostic data display, configuration, uploading configuration files, and operation mode Settings. This can be done via a standard web browser and the AN-X2-AB-DHRIO is very easily integrated into modern control systems for legacy devices, as well as cost-effectively ported to exciting and outdated products. It allows the continued use of these devices without the need for complete replacement, providing customers with a flexible and practical alternative solution to their existing automation requirements. The AN-X2-AB-DHRIO module is AN Ai-Budetien network /P to DH+R0 connector. This communication block in the Contr/Lox series helps to connect ControLogx PLCS as compatible devices to AIlen-Bradlev remote /0 networks. The communication module comes with a 1/0 channel, which supports all remote /0 baud rates from 57.6 to 230.4 kilobord, and the module supports frame numbers from 0 to 76 octal. This utility maps remote /0 data to Contrologx plan data. The module is connected to the Controllogix processor using a scheduled connection over an Ethernet network. The front of the communication module has two LED indicators to show the Ethernet connection status, and another LED indicator to show the internal communication status of the module. The operating temperature of the Allen Bradley An-X2-AB-DHRI0 ConroLox communication module should be set between 0 and 50 degrees Fahrenheit. Easy to install using DN rails, an X2 AB DHRIO module with a fixed power consumption of 200 amps with a rated voltage of 12 V DC or 100 mA with a rated voltage of 24 V DC, this communication module has a maximum power rating of 2.4 watts, an X2 AB DHRIO module helps replace existing remote /O PLCS. It helps build new controller programs without disrupting existing control systems and minimizes downtime. It comes with an auto-configuration utility that detects baud rates and maps scatter /0 to reduce configuration errors, communication modules with an R45 10/100 Mbps Ethernet port, an ohenix 3-pin power connector and a Phoenix 3-pin network connector.

AN-X2-AB-DHRIO