CC-PCNT02 HONEYWELL 处理器模块FS-2173-2RP探测器

制造商:霍尼韦尔
零件号:CC-PCNT02
C300模块控制器
原产地:美国
C300控制器CC-PCNT02取代CC-PCNT01，用于新安装和现场更换
C300控制器必须使用CC-PCNT02型号和C300扩展功能能的扩展功能固件映像(EIM，利润控制器
仅CC-PCNT02支持利润控制器集成
C300s通过控制防火墙连接
控制防火墙，CF9充当网络聚合器
通过以太网连接4台C300s
霍尼韦尔C300控制器模块CC-PCNT02/51454551-275
运输重量:3公斤
HONEYWELL CC-PCNT02 处理器模块FS-2173-2RP探测器维护内部历史记录（事件日志），最多200个事件（火灾、故障、重置等）。

CC-PCNT02

这个可以使用带有至少486型PC和适当的PC软件。安装支架位置a、 探测器具有120度锥形视野（视角）。建议探测器位于主要火灾威胁位置探测器视野的轴。由于探测器必须“看到”火灾才能探测到它，它应该安装在角落和天花板等位置避免视线堵塞。b、 选择将固定探测器与外壳材料类型保持一致地方例如，可以在安装支架，并用螺钉、铆钉等固定。如果安装面为聚丙烯，可进行热焊接用于固定支架。c、 将外壳滑到安装支架上，直到它锁定到位。将每个“引线”连接到适当的连接上外部设备。接线见第6节表1细节。小心：在处理探测器的引线。正确使用腕带接地将有助于防止产品损坏。

CC-PCNT02

Manufacturer: Honeywell
Part number :CC-PCNT02
C300 module controller
Country of Origin: USA
C300 controller CC-PCNT02 replaces CC-PCNT01 for new installation and field replacement
The C300 controller must use the CC-PCNT02 model and the C300 Extended Function capable of the Extended function firmware image (EIM, Profit controller)
Only CC-PCNT02 supports profit controller integration
The C300s is connected through the control firewall
The control firewall, CF9 acts as a network aggregator
Four C300s are connected through Ethernet
Honeywell C300 controller module CC-PCNT02/51454551-275
Shipping weight :3 kg
HONEYWELL CC-PCNT02 Processor module FS-2303-2RP detector maintains an internal history (event log) of up to 200 events (fire, failure, reset, etc.).

This can be used with at least a type 486 PC and appropriate PC software. The detector has a 120-degree conical field of view (Angle of view). It is recommended that the detector be located on the axis of the detector field of view at the primary fire threat location. Since the detector must “see” the fire in order to detect it, it should be installed in places such as corners and ceilings to avoid blocking the line of sight. B. Select the place where the fixed detector is consistent with the material type of the housing. For example, you can install the bracket and fix it with screws, rivets, etc. If the mounting surface is polypropylene, it can be thermally welded for fixing the bracket. c. Slide the housing onto the mounting bracket until it locks into place. Connect each “lead” to the appropriate connected external device. The wiring is detailed in Table 1, Section 6. Caution: In handling detector leads. Proper use of wrist strap grounding will help prevent product damage.

CC-PCNT02