DS200ADGIH1AAA 燃机卡件GE

DS200ADGIH1AAA
是GE Fanuc生产的VersaMax系列屏障型I / O载体。它由36个栅栏式端子组成， 并为一个输入输出模块提供背板通信和现场布线。
突出的功能包括将模块地固定在托架中的闩锁孔和为接线端子提供覆盖的透明铰链门。每个输入输出模块都带有印刷线路卡标签，可以叠并到铰链门中。每当需要额外的总线连接点时，下边缘上的凹口用于连接辅助输入输出端子排。
IC2CHS1可以卡入7.5 mm x 35 mm DIN导轨。为了照顾电磁兼容性（EMC），将DIN导轨接地重要。导轨具有导电腐蚀涂层，是未上漆的。如果应用需要地抵机械振动，则IC2CHS1也安装在面板上。
GE辅助接口板DS200ADGIH1AAA具有-个40针连接器、60跳线和一个6针连接器GE辅助接口板DS200ADGIH1AAA也装有多测试点，这块木板有8英寸宽，DS200ADGIH1AAA长6英寸，设计用于安装在变频器的机柜中。它有四个钉，它们与板架上的一个位置对齐，以便用螺钉安装。

DS200ADGIH1AAA

测试点提供了一种测试电路板上电路的方法，但是，只有合格的维修人员才能测试主板。服务人员必须拥有为该任务而校准和设计的测试设备。控制装置必须正确设置，探头必须设计为与测试仪一起使用。将电路板放在平坦的表面上，并在电路板下放置一个保护袋。
此外，由于静电风险，维修人员必须始终佩戴腕带。正确安装腕带后，腕带的一端系在您的手腕上，另一端来在工作台或书桌的全屋服上。它如可以连接到其他金属结构上。静电被吸引到金属地面，并离开电路板或您的身体。减少静电积累的另一个适当的步职是，在将电路板握在手中时，避免四处移动。行走的座擦导致静电积聚、在凉爽干煤的天气条件下尤其如此。如果没有腕带，您也可以将装有冲浪板的静电包接触到金属结构，如椅子或金属桌腿。
VME总线是一种通用的计算机总线，结合了Motorola公司Versa总线的电气标准和在欧洲建立的Eurocard标准的机减形状因子，是一种。它定义了一个在紧密合(closely coupled) 硬件构架中可进行互连数据处理、数据存储和连接外围控制件的系统，经过多年的改造升级，VME系统已经发展的非常完善，围绕其开发的产品遍及了工业控制、军用系统、航空航天、交通运输和医疗等领域。VME数据传输机制是异步的，有多个总线周期，地外宽度是16、24、32、4064位，数据线路的宽度是8、16、24、32、64位，系统可以动本的选择它们。它的数据传输方式为异步方式，因此只受制于信号交换协议，而不依赖于系统时钟，其数据传输速率为0~ 500Mb/s;此外，还有UnalignedData传输能力，差纠正能力和自我诊断能力，用户可以定义/0端口:其配有21插卡插博和多人背板，在至事应用中可以使用传导冷却模块。
一个部分是它的机械构架，此部分决定着VMEbus 系统背板、前置面板和嵌入板因为是两种标准的结合，那么VME系统也可以被看作是两个部分。
的尺寸大小;而令一部分则是功能构架，它定义了系统的运转流程。

DS200ADGIH1AAA

DS200ADGIH1AAA
It is the VersaMax series barrier I/O carrier produced by GE Fanuc. It consists of 36 palisade terminals and provides backplane communication and field wiring for an input/output module.
Prominent features include latch holes that anchor the module to the carrier and transparent hinged doors that provide cover for the terminal. Each input/output module comes with a printed line card label that can be folded and inserted into the hinged door. Whenever additional bus connection points are required, a notch on the lower edge is used to connect the auxiliary input/output terminal block.
The IC2CHS1 can be clipped into a 7.5mm x 35 mm DIN rail. To take care of electromagnetic compatibility (EMC), it is important to ground the DIN rail. The guide rail has a conductive corrosion coating and is unpainted. If the application requires ground resistance to mechanical vibration, the IC2CHS1 is also mounted on the panel.
The GE auxiliary interface Board DS200ADGIH1AAA has – 40 pin connectors, 60 jumpers, and a 6-pin connector The GE auxiliary interface board DS200ADGIH1AAA is also equipped with multiple test points. The board is 8 inches wide and the DS200ADGIH1AAA is 6 inches long and is designed to be installed in the inverter cabinet. It has four nails, which are aligned with a position on the board frame for installation with screws.
The test point provides a way to test the circuit on the board, however, only qualified maintenance personnel can test the motherboard. Service personnel must have test equipment calibrated and designed for the task. The control device must be set up correctly and the probe must be designed for use with the tester. Place the board on a flat surface and place a protective bag under the board.
In addition, due to the risk of static electricity, maintenance personnel must always wear wristbands. When the wristband is properly installed, one end of the wristband is attached to your wrist and the other end is attached to the whole room of the workbench or desk. It can be attached to other metal structures. Static electricity is attracted to the metal floor and leaves the circuit board or your body. Another appropriate step to reduce static buildup is to avoid moving the board around while holding it in your hand. Walking scrubs cause static electricity to build up, especially in cool, dry coal weather. If you don’t have a wristband, you can also touch the static bag containing the surfboard to a metal structure, such as a chair or metal table leg.
The VME bus is a general-purpose computer bus that combines the electrical standard of Motorola’s Versa bus with the reduced form factor of the Eurocard standard established in Europe. It defines a system that can interconnect data processing, data storage, and peripheral controls in a closely coupled hardware architecture. After years of upgrading, the VME system has developed very well. Products developed around it span the fields of industrial control, military systems, aerospace, transportation and medical. The VME data transmission mechanism is asynchronous, there are multiple bus cycles, the outer width is 16, 24, 32, 4064 bits, the width of the data line is 8, 16, 24, 32, 64 bits, the system can choose them manually. Its data transmission mode is asynchronous, so it is only subject to the signal exchange protocol, and does not rely on the system clock, and its data transmission rate is 0~ 500Mb/s; In addition, there is UnalignedData transmission ability, poor correction ability, and self-diagnostic ability, users can define the /0 port: it has a 21-card plug-in and multi-player backplane, can use conductive cooling module in the most important applications.
One part is its mechanical structure, which determines the VMEbus system backplane, front panel and insert plate because it is a combination of two standards, then the VME system can also be regarded as two parts.
The size of; The other part is the functional architecture, which defines the flow of the system.

DS200ADGIH1AAA