GPIB-140A 总线扩展器NI

1 km，GPIB总线扩展器一GPIB-140A可将GPIB系统的线织延长-千米，而不会影响GPIB的完整性，也无黑像改软件。该配件使用缓冲传输技术数据传输速率高达1.1 Mb/s (EEE 488.1)或2.8 Mb/s (HS488)。GPB-140A还可以将GPIB系统中GPB设备的最大数量从15增加到26。这镇GP1B-140A(季件号777997-01.777997-02.777997-03.777997-04 777997-05,以及777997-06是-人GPIB总线扩展器。这种设备很容易消除IEEE 488标准强制/要求的电缆长度和设备负载相关的限制。这GPIB-140A完全兼容IEEE 488.1EEE 488.2标准，根据IEEE 488标准，任何GPIB系统的总长度都不能超过20米GPIB扩展器可以达到1公里的总距离，而无需任何修改，也不会影响用户的GPIB系统的完整性

GPIB-140A

这GPIB扩展器可支持长达1公里的光缆。这镍GPIB-140A附带一个缓传输技术，使这个模型成为最快的GPIB总线扩展器可用。利用这一模型，用户在HS488协议下工作时可以实现2,8兆字节以上的速度，这GPIB扩展器可以轻松部署，不需要额外的硬件，在典型情况下，计算机设备的一端连按到电缆扩展器。在远端，GPIB仪器连接到一个类似的电缆延长线上。然后，两个电缆延伸器通过光缆互连
每人镍GPIB-140A持续监控GPIB活动，并将GPIB信号转换为并行或电行信号，以传输到接收扩展器。接收扩展器从发送扩展器接收电行或并行信号，并将其转换为IEEE 488信号，这镍GPIB-140A不需要修改现有的软件应用程序，因为它是软件透明的。

GPIB-140A

1 km, GPIB Bus extender A GPIB-140A extends the wire fabric of a GPIB system by -km without compromising the integrity of the GPIB and without black image modification software. The accessory uses buffered transfer technology for data transfer rates up to 1.1 Mb/s (EEE 488.1) or 2.8 Mb/s (HS488). The GPB-140A can also increase the maximum number of GPB devices in a GPIB system from 15 to 26. The town GP1B-140A(season number 777997-01.777997-02.777997-03.77797-04 77797-05, and 77797-06 are -human GPIB bus extenders. This device easily eliminates the limitations related to cable length and device load imposed/required by the IEEE 488 standard. This GPIB-140A is fully compatible with the IEEE 488.1EEE 488.2 standard, according to the IEEE 488 standard, the total length of any GPIB system cannot exceed 20 meters. The GPIB extender can reach a total distance of 1 km without any modification and without affecting the integrity of the user’s GPIB system
The GPIB extender can support up to 1 km of cable. This nickel GPIB-140A comes with a caching technology that makes this model the fastest GPIB bus extender available. With this model, users can achieve speeds of more than 2,8 megabytes when working under the HS488 protocol, and the GPIB extender can be easily deployed without the need for additional hardware, typically with one end of the computer device attached to the cable extender. At the far end, the GPIB instrument is connected to a similar cable extension. The two cable extenders are then connected via optical cable
The per-person Nickel GPIB-140A continuously monitors GPIB activity and converts GPIB signals into parallel or telebank signals for transmission to the receive expander. The receiving extender receives a teleline or parallel signal from the sending extender and converts it into an IEEE 488 signal, which does not require modification of existing software applications because it is software-transparent.

GPIB-140A