IC698CMX016-ED GE 控制存储器

IC698CMX016 是 PACSystems RX7i 控制内存交换模块，由艾默生自动化（以前由 GE 智能平台 (GE IP)）制造。该模块用于通过光纤网络在 PLC 之间共享确定性数据。该模块是一个单插槽模块，具有 16 MB 反射内存，具有奇偶校验功能。它有一个专为 LC 型连接器设计的光纤端口，支持 2.12 Gbaud 数据传输。该模块支持通过 FO 电缆的菊花链连接最多连接 256 个节点。

IC698CMX016 是来自可编程自动化控制器 (PAC) 的 PACSystem RX7i 平台的控制内存交换模块。该组件本质上是一个内存模块，但是 IC698CMX016 的主要功能是使用反射内存技术通过光纤网络在 PLC 和兼容设备之间提供确定性的数据共享。

IC698CMX016 的通信接口包括一个 LC 光纤端口，支持多模光纤介质上 2.12 Gbaud 的传输速度，最大距离为 300 米或 984.25 英尺 支持的动态数据包大小范围为 4-64 字节，最大网络传输速率为 43 MB 4 字节数据包中的 / 秒到 64 字节数据包中的 174 MB / 秒。该内存模块能够与每个网络多达 256 个节点进行通信，并支持冗余传​​输模式操作。
C698CMX016是可编程自动化控制器(PA)PAC system RX7平台的控制存储器交换模块。该组件本质上是一个存储模块，但IC698CMX016的主要功能是使用反射存储技术在光纤网络上的PLC和兼容设备之间提供确定性的数据共享.
该模块配有16 MB SDRAM的奇便校验反射内存。它安装车RX7湖架上，占据背板的一个插博。该模块独立于CPU，因为它不需要任何CPU处理来运行。此外，它与VMIC 5565系列反射式存储设备网络兼容
C698CMX016的通信接口包括一个LC光纤端口，在多模光纤个质上支持212 Gbaud的传速度，最大距离为300米或984.25英尺，支持的动态数据包大小范围为4-64字节，最大网络传输速率为43兆字节/(4字节数据包)至174兆字节/秒64字节数据包)。该内存模块能够与每人网络多达256人节点进行通信，并支持冗余传输模式操作。

IC698CMX016-ED

C698CMX016前面板配有各种LED状态指示器，如OK、CONFG、OWN DATASIGNAL DETECT，要利用IC698CMX016的功能，必须将其安装在带有2.00版或更高版本固件的s RX7iCPU、带电源的RX7CPU机架上，并使用ProFicy Machine Edition-loic Developer PLC 4.5版或更高版本进行配置。
GE FanuC1C698CMX016通信模块是Rx7i系统的控存储器本换或CMX模块，该模在1C和高速光纤网络反时式有烤系统上连接的现场设各之提供预编程数据共享，IC698CMX016模块可以在单个反射内存网络中容纳多达256个节点，并且它与连接到每个节点的VMIC 5565系列反射内存设备兼容。每个VMIC 5565设备通过光以菊花链环路的形式连接到212 GBaud光纤网络，1C698CMX016通信模块可以在每秒43兆字节(4字节动本数据包大)到每秒174兆字节(64字节动态数据包大小)的可配置传输范围内传输现场数据，它具有16 MB的用户存储器(SDRAM)和来自机器版(ME逻辑开发PLC的可靠软件配置，版本4.5或更高版本的软件
GE Fanuc 1C698CMX016模块的额定电压为5,.0优DC，最大工作电流为1,8安培，在IC698CMX016模块的前面板上，有一个光收发器，带有两人标记为TX和RX的光纤端口，用于发送和接收现场数据。C698CMX016模块提供用户可配置的VME总线输出，通过它启动网络数据传输，它还提供网络错误检测，以实现平稳的数据传输，IC698CMX016模块安装在Rx71 PACsystem l/0机架的单个插槽中，它带有4个前面板状态/诊断led，分别是OK CONFIG、OWN DATA和SIGNAL DETECT LEDS，用于显示模块的操作和通信状态。

The IC698CMX016 is a PACSystems RX7i control memory switch module manufactured by Emerson Automation (formerly GE Intelligent Platform (GE IP)). The module is used to share deterministic data between PLCS over a fiber optic network. The module is a single slot module with 16 MB of reflected memory with parity. It has a fiber optic port designed for LC type connectors and supports 2.12 Gbaud data transfer. The module supports the connection of up to 256 nodes through the Daisy chain connection of the FO cable.

The IC698CMX016 is a control memory switch module for the PACSystem RX7i platform from the Programmable Automation Controller (PAC). The component is essentially a memory module, but the main function of the IC698CMX016 is to provide deterministic data sharing between the PLC and compatible devices over a fiber optic network using reflected memory technology.

The IC698CMX016 communication interface includes an LC fiber port that supports 2.12 Gbaud transfer speeds over multimode fiber media, a maximum distance of 300 meters or 984.25 feet, and supports dynamic packet sizes ranging from 4 to 64 bytes. Maximum network transfer rates range from 43 MB/s in 4-byte packets to 174 MB/s in 64-byte packets. The memory module is capable of communicating with up to 256 nodes per network and supports redundant transmission mode operation.
The C698CMX016 is a control memory switch module for the Programmable Automation Controller (PA)PAC system RX7 platform. The component is essentially a storage module, but the main function of the IC698CMX016 is to provide deterministic data sharing between PLCS and compatible devices on a fiber optic network using reflective storage technology.
The module is equipped with 16 MB SDRAM of odd-check reflected memory. It mounts on the car RX7 lake rack, occupying the backplane of a plug-in. This module is CPU independent because it does not require any CPU processing to run. In addition, it is compatible with the VMIC 5565 series reflective storage device network
The communication interface of the C698CMX016 includes an LC fiber port that supports 212 Gbaud speeds over multimode fiber masses over a maximum distance of 300 meters or 984.25 feet, and supports dynamic packet sizes ranging from 4 to 64 bytes. Maximum network transfer rates range from 43 megabytes /(4-byte packets) to 174 megabytes/second (64-byte packets). The memory module is capable of communicating with up to 256 person nodes per person network and supports redundant transport mode operation.
The C698CMX016 front panel is equipped with various LED status indicators, such as OK, CONFG, OWN DATASIGNAL DETECT, to take advantage of the functions of IC698CMX016, It must be installed on an s RX7iCPU with firmware version 2.00 or later, an RX7CPU rack with power supply, and configured using ProFicy Machine Edition-loic Developer PLC version 4.5 or later.
The GE FanuC1C698CMX016 communication module is the Rx7i system’s control memory exchange or CMX module, which provides pre-programmed data sharing between the field devices connected on the 1C and high-speed fiber optic network, and the IC698CMX016 module can accommodate up to 256 nodes in a single reflective memory network. And it is compatible with the VMIC 5565 series reflective memory devices connected to each node. Each VMIC 5565 device is connected to a 212 GBaud fiber network via optical Daisy chain loop, and the 1C698CMX016 communication module can transmit field data in a configurable transmission range of 43 megabytes per second (4 bytes of dynamic data packet size) to 174 megabytes per second (64 bytes of dynamic data packet size). It has 16 MB of user memory (SDRAM) and reliable software configuration from the Machine Edition (ME Logic Development PLC, software version 4.5 or later
The GE Fanuc 1C698CMX016 module has a voltage rating of 5,.0 excellent DC and a maximum operating current of 1,8 amps. On the front panel of the IC698CMX016 module, there is an optical transceiver with two optical fiber ports labeled TX and RX for sending and receiving field data. The C698CMX016 module provides a user-configurable VME bus output through which network data transmission is initiated, it also provides network error detection for smooth data transmission, the IC698CMX016 module is installed in a single slot in the Rx71 PACsystem l/0 rack, and the IC698CMX016 module is also installed in a single slot in the RX71 PACSystem L /0 rack. It comes with 4 front panel status/diagnostic LEDS, namely OK CONFIG, OWN DATA and SIGNAL DETECT LEDS, which are used to display the module’s operation and communication status.

IC698CMX016-ED