IC698CPE030 GE 可编程自动化控制器

IC698CPE030是可编程自动化控制器(PAC)的PAC系统RX7i中最先进的中央处理器(CPU)之一。这款CPU的设计是为了满足现代自动化、连接和集成的行业要求。它以前是由GE智能平台(GE IP)制造的，但随着艾默生自动化最近的收购，PACSystem RX7i现在是后者的一部分。

IC698CPE030处理器安装了计算机级微处理器，即600MHz奔腾- m微处理器，具有64mb用户内存和64mb用户闪存。它显示布尔执行速度0.069毫秒每1000布尔触点/线圈。这个CPU可以容纳多达32k位的离散I/O和32k字的模拟I/O。最多可以将512个程序块下载到该CPU，其中每个程序块最多可以具有128 KB的内存。

IC698CPE030还具有两(2)个以太网通信端口，能够自动感知网络传输速度，并可配置为半双工和全双工工作模式。内置的web服务器和文件传输协议(FTP)功能可通过这些以太网端口访问，允许用户远程监控和配置处理器。除了内置的以太网端口，

IC698CPE030

这个CPU也有一个(1)RS232端口;1 (1) RS485接口，1(1)站长接口。这些通信接口支持SRTP、Modbus TCP服务器和客户端、以太网全局数据(EGD)(基于以太网的通信)和Modbus RTU Slave、SNP、串行I/O(串行通信)。

GE Fanuc IC698CPE030 PACSystem Rx7i中央处理器是GE Rx7i系统的奔腾处理器。IC698CPE030 CPU，像所有的Rx7i CPU一样，安装在Rx7i I/O机架上，它带有VME64基础架构，可兼容新旧VME嵌入式技术，具有快速的吞吐量评级。IC698CPE030 CPU配备600兆赫奔腾M处理器和电池支持的64兆处理器内存，以及用于应用程序和数据存储的64兆用户闪存。IC698CPE030处理器可以执行浮点数学和布尔逻辑功能，高级用户参数可以使用梯形图、结构化文本、功能框图和C语言编程。

GE Fanuc IC698CPE030 CPU支持系列90-70离散和模拟I/O模块，通信模块，系列90-70支持的VME模块，以及各种编程和HMI模块。IC698CPE030 CPU额定直流电压为+5、+12或-12伏，直流电压为5伏时背板额定电流为3.4安培。IC698CPE030具有一个隔离的RS-485串口、一个RS-232串口和一个专用的RS-232以太站管理器端口。IC698CPE030具有双嵌入式以太网(10/ 100mb)端口，提供以太网EGD (Ethernet Global Data)数据交换、TCP/IP高速数据传输，支持Modbus/TCP Server、Modbus/TCP Client和SRTP Channel协议，可与程序员和HMI设备通信。IC698CPE030 CPU配置了4.5及以上版本的ME (Proficy Machine Edition) Logic Developer配置软件，提供先进的应用编程环境，支持通过web服务器和FTP连接进行web数据监控。

IC698CPE030

The IC698CPE030 is one of the most advanced central processing units (cpus) in the Programmable Automation Controller (PAC) PAC System RX7i. This CPU is designed to meet the industry requirements of modern automation, connectivity and integration. It was previously manufactured by GE Intelligence Platform (GE IP), but with Emerson Automation’s recent acquisition, PACSystem RX7i is now part of the latter.

The IC698CPE030 processor is equipped with a computer-grade microprocessor, a 600MHz Pentium-M microprocessor, with 64mb of user memory and 64mb of user flash memory. It shows a Boolean execution speed of 0.069 ms per 1000 Boolean contacts/coils. This CPU can accommodate up to 32k bits of discrete I/O and 32k words of analog I/O. Up to 512 blocks can be downloaded to this CPU, where each block can have up to 128 KB of memory.

The IC698CPE030 also features two (2) Ethernet communication ports that automatically sense network transmission speeds and can be configured to operate in both half-duplex and full-duplex modes. The built-in web server and File Transfer Protocol (FTP) capabilities are accessible through these Ethernet ports, allowing users to remotely monitor and configure the processor. In addition to the built-in Ethernet port,

This CPU also has a (1)RS232 port; 1(1) RS485 interface, 1(1) webmaster interface. These communication interfaces support SRTP, Modbus TCP server and client, Ethernet Global Data (EGD)(Ethernet-based communication) and Modbus RTU Slave, SNP, Serial I/O(serial communication).

The GE Fanuc IC698CPE030 PACSystem Rx7i CPU is a Pentium processor for the GE Rx7i system. The IC698CPE030 CPU, like all Rx7i cpus, is mounted on the Rx7i I/O rack, and it comes with a VME64 infrastructure that is compatible with old and new VME embedded technologies, with fast throughput ratings. The IC698CPE030 CPU is equipped with a 600 MHZ Pentium M processor and 64 megabytes of battery-supported processor memory, as well as 64 megabytes of user flash memory for applications and data storage. The IC698CPE030 processor can perform floating-point math and Boolean logic functions, and advanced user parameters can be programmed using ladder diagrams, structured text, functional block diagrams, and C language.

The GE Fanuc IC698CPE030 CPU supports Series 90-70 discrete and analog I/O modules, communication modules, Series 90-70 supported VME modules, and various programming and HMI modules. The IC698CPE030 CPU is rated at +5, +12, or -12 volts. The backplane is rated at 3.4 amps when the DC voltage is 5 volts. The IC698CPE030 has an isolated RS-485 serial port, an RS-232 serial port, and a dedicated RS-232 Ethernet station manager port. IC698CPE030 has dual embedded Ethernet (10/100mb) ports, providing Ethernet Global Data (EGD) data exchange, TCP/IP high-speed data transmission, Supports Modbus/TCP Server, Modbus/TCP Client, and SRTP Channel protocols to communicate with programmers and HMI devices. The IC698CPE030 CPU is configured with Proficy Machine Edition (ME) Logic Developer configuration software 4.5 or later, which provides an advanced application programming environment and supports web data monitoring through a web server and FTP connection.

IC698CPE030