IC698CPE040-FJ GE 中央处理器

IC698CPE040 CPU或中央处理器是由GE发那科在GE RX7i PACSystem产品线中设计和制造的，它的功能尽可能强大。GE IC698CPE040 CPU以其快速的程序和应用程序执行速度，相当大的内存容量以及易于升级的能力而闻名。这种CPU可以使用很长时间，因为它可以容纳升级，使其能够跟上新技术和新的工业应用需求。IC698CPE040 CPU设计用于RX7i pac系统PLC或可编程逻辑控制器。IC698CPE040 CPU的负载要求为:直流5v时为6.8安培，直流12v和- 12v时为0.003安培。

GE Fanuc RX7i PACSystem IC698CPE040 CPU的规格包括64mb用户内存和1800兆赫的额定处理器速度。这个CPU是Pentium-M CPU。它包括3个串行端口，它们都是独立和隔离的，并且都可以从CPU前面的连接器访问。其中两个独立的端口既可以用于对CPU进行固件升级，也可以用于创建与外部设备的串行接口。第三个端口是以太网接口的工作站管理端口。IC698CPE040 CPU上的第一个固件端口是一个rs -232兼容端口，带有指示灯，显示该端口的活动指示。第二个固件端口是rs -485兼容的，它需要屏蔽电缆进行连接。第三个端口与第一个固件端口一样兼容rs -232。

IC698CPE040-FJ

IC698CPE040是GE Fanuc为RX7i系列生产的1.8 MHz中央处理器。IC698CPE040采用奔腾M微处理器，装载64 MB用户内存和64 MB用户闪存。就像任何其他RX7i CPU一样，IC698CPE040被配置为执行设备、过程和材料处理结构的实时控制。机架安装背板通过VME64标准格式促进IC698CPE040、I/O和智能选件模块之间的通信。

嵌入式以太网端口方便了IC698CPE040、编程器和不同HMI设备之间的通信。通电后，IC698CPE040会进行常规自诊断检查。在初始化过程中，LED灯按顺序打开和关闭。初始化结束后，OK LED灯将会闪烁，然后亮起。RAM存储器由锂电池组IC698ACC701保护。

为避免记忆丧失，日常维护程序应包括锂电池组的定期更换。除了维护程序和数据存储，锂电池还可以在断电时运行日历时钟。这IC698CPE040CPU提供了许多重要的功能，包括使用任意数量用户内存的自动定位符号变量、VME模块支持、允许用户即使在程序运行时也能轻松测试修改的测试编辑模式、位字引用以及三个不同的串行端口。CPU和模块固件可以通过CPU的RS-232或RS-485串行端口上的Win loader进行升级。

IC698CPE040-FJ

The IC698CPE040 CPU, or central processing unit, is designed and manufactured by GE Fanuc in the GE RX7i PACSystem product line to be as powerful as possible. The GE IC698CPE040 CPU is known for its fast program and application execution speed, considerable memory capacity, and the ability to upgrade easily. This CPU can last a long time because it can accommodate upgrades, allowing it to keep up with new technologies and new industrial application demands. The IC698CPE040 CPU is designed for use with an RX7i pac system PLC or programmable logic controller. The load requirements for the IC698CPE040 CPU are 6.8 amps at 5v DC and 0.003 amps at 12v DC and -12 V DC.

The specifications of the GE Fanuc RX7i PACSystem IC698CPE040 CPU include 64mb of user memory and a rated processor speed of 1800 MHZ. This CPU is a Pentium-M CPU. It consists of 3 serial ports, all of which are independent and isolated, and all accessible from the connector on the front of the CPU. Two of these separate ports can be used either to perform firmware upgrades to the CPU or to create serial interfaces with external devices. The third port is the workstation management port of the Ethernet interface. The first firmware port on the IC698CPE040 CPU is an rs-232 compatible port with an indicator indicating the activity of that port. The second firmware port is rs-485 compatible and requires a shielded cable for connection. The third port is as compatible with rs-232 as the first firmware port.

The IC698CPE040 is a 1.8 MHz CPU produced by GE Fanuc for the RX7i series. The IC698CPE040 uses a Pentium M microprocessor with 64 MB of user memory and 64 MB of user flash memory. Just like any other RX7i CPU, the IC698CPE040 is configured to perform real-time control of devices, processes, and material handling structures. The rack-mount backplane facilitates communication between IC698CPE040, I/O, and intelligent option modules through the VME64 standard format.

The embedded Ethernet port facilitates communication between the IC698CPE040, the programmer, and different HMI devices. When powered on, the IC698CPE040 performs routine self-diagnostic tests. During initialization, the LED lights turn on and off sequentially. After initialization, the OK LED light will flash and then light up. The RAM memory is protected by the lithium battery pack IC698ACC701.

To avoid memory loss, routine maintenance procedures should include regular replacement of the lithium battery pack. In addition to maintaining programs and data storage, lithium batteries can also run a calendar clock during power outages. The IC698CPE040CPU provides a number of important features, including automatic positioning of symbol variables using any amount of user memory, VME module support, a test edit mode that allows users to easily test modifications even while the program is running, bit word references, and three different serial ports. The CPU and module firmware can be upgraded via Win loader on the RS-232 or RS-485 serial port of the CPU.

IC698CPE040-FJ