MVI56-PDPS PROSOFT 通信网络接口模块

MVI56-PDPS PROSOFT 通信网络接口模块

MVI系列中的所有模块都使用可充电的五氧化二钒锂电池
备份512K SRAM内存、实时时钟、CMOS。电池应该可以使用
模块的寿命。
该模块必须通电大约20小时才能充满电
起诉。充满电后，电池为CMOS设置提供备用电源
和配置数据，实时时钟，以及512K SRAM内存
大约21天。
从电源拔出模块前，请确认模块内的电池没有损坏
模块已充满电。一个充满电的电池将保持BIOS设置(经过)
从其电源中移除)，时间有限(PC56为15天)。当
电池完全放电后，模块将恢复到默认的BIOS设置。

MVI56-PDPS

软件组件:
罗克韦尔自动化ControlLogix™处理器，具有兼容的电源
电源和机架上的一个免费插槽，用于MVI56-PDPS模块。的
模块需要800mA的可用功率。
罗克韦尔自动化RSLogix 5000编程软件版本2.51或
更高。
罗克韦尔自动化RSLinx通信软件
奔腾®II最低450mhz。Pentium III 733 MHz(或更高)
推荐
支持的操作系统:
o Microsoft Windows XP Professional with Service Pack 1或2
o Microsoft Windows 2000 Professional(含Service Pack 1、2或3)
o Microsoft Windows Server 2003
最少128 mb的RAM，建议256 mb的RAM
MVI56-PDPS模块的示例程序包括自定义标记、数据
数据I/O和状态监控的类型和阶梯逻辑。对于大多数应用程序，
您可以在不修改的情况下运行示例阶梯程序，也可以使用高级程序
应用程序，您可以将示例程序合并到您现有的
应用程序。
附加在文件名后的版本号与固件对应
ControlLogix处理器的版本号。固件版本和
样例程序版本必须匹配。

MVI56-PDPS

All modules in the MVI series use rechargeable lithium vanadium pentoxide batteries
Back up 512K SRAM memory, real-time clock, CMOS. The battery should work
Lifetime of the module.
The module must be powered on for about 20 hours to be fully charged
Sue. When fully charged, the battery provides backup power for the CMOS setup
And configuration data, real-time clock, and 512K SRAM memory
About 21 days.
Before removing the module from the power supply, ensure that the battery in the module is not damaged
The module is fully charged. A fully charged battery will keep BIOS Settings (through)
Removed from its power supply) for a limited time (15 days for PC56). when
After the battery is fully discharged, the module reverts to the default BIOS Settings.
The minimum hardware requirements of the MVI56-PDPS module are as follows
Software components:
Rockwell Automation ControlLogix™ processor with compatible power supply
Power supply and a free slot in the rack for the MVI56-PDPS module. the
The module requires 800mA of available power.
Rockwell Automation RSLogix 5000 Programming software version 2.51 or
Higher.
Rockwell Automation RSLinx communication software
Pentium ®II starts at 450mhz. Pentium III 733 MHz(or higher)
Recommended
Supported operating systems:
o Microsoft Windows XP Professional with Service Pack 1 or 2
o Microsoft Windows 2000 Professional(with Service Pack 1, 2, or 3)
o Microsoft Windows Server 2003
Minimum 128 mb of RAM, 256 mb of RAM recommended
Sample programs for the MVI56-PDPS module include custom tags, data
Types and ladder logic for data I/O and status monitoring. For most applications,
You can run the example ladder program without modification, or you can use the advanced program
Application, you can incorporate sample programs into your existing ones
The application.
The version number appended to the file name corresponds to the firmware
ControlLogix processor version number. Firmware version and
The sample program version must match.

MVI56-PDPS