SST-PFB3-VME 多个单相计数器

产品介绍：
型号：SST-PFB3-VME-2-e
使用多个单相计数器时，频率和必须不大于14KHz。只允许单、双相速计数器同时使用。当使用双相计数器时，记数速度必须大于14KHz，计算为（记数边数为5时，2ph计数器速度）+1ph计数器速度。C235至C238
4点（注意C235被锁定）
单相c/w起始
停止输入C241（锁定）、C242和C244（锁定）3点
双相C246、C247和C249（都锁定）3点
A/B相C251、C252和C254（都锁定）3点
数据寄存器
（D）一般128点D0至D127
类型：32位元件的16位数据存储寄存器对
锁定128点D128至D255
类型：32位元件的16位数据存储寄存器对
外部调节范围：0至255 2点通过外部设置电位计间接输入D8013或D8030&D803114数据
特殊256点（包含D8030，D8031）从D8000至D8255
类型：16位数据存储寄存器
变址16点V和Z
类型：16位数据存储寄存器
OPC数据访问服务器v3.0
通过双端口RAM接口轻松移植到各种操作系统
设备级别的流程一致性数据
用于存储配置数据的内部闪存
通过DP配置和网络诊断软件实现快速调试
从FDT框架应用中轻松访问DP-V1和PA变量
Molex/Woodhead SST-PFB3-PCI Profibus接口卡可以连接连接到Profibus DP-V0、DP-V1和FDL网络的PCI总线计算机。它在自动化之间提供高速确定性通信系统及其分散式外围设备。
PFB3接口卡专为自动化设计人员开发以及寻求可靠和高性能的控制系统通信解决方案。

SST-PFB3-VME

Product Introduction:
Model: SST-PFB3-VME-2-e
When using multiple single-phase counters, the frequency sum must not be greater than 14KHz. Only single and dual phase speed counters are allowed to be used simultaneously. When using a biphase counter, the counting speed must be greater than 14KHz, calculated as (2ph counter speed when the number of counting sides is 5) +1ph counter speed. C235 to C238
4:00 (note that C235 is locked)
Single-phase c/w start
Stop entering C241 (lock), C242, and C244 (lock) 3 points
Biphasic C246, C247 and C249 (all locked) 3 points
A/B phases C251, C252 and C254 (all locked) 3 points
Data register
(D) Generally 128 points D0 to D127
Type: 16-bit data storage register pair of 32-bit element
Lock 128 points D128 to D255
Type: 16-bit data storage register pair of 32-bit element
External adjustment range: 0 to 255 2 points indirect input of D8013 or D8030&D803114 data via external setting potentiometer
Special 256 points (including D8030, D8031) from D8000 to D8255
Type: 16-bit data storage register
Index 16 points V and Z
Type: 16-bit data storage register
OPC Data Access Server v3.0
Easy port to various operating systems via dual port RAM interface
Process consistency data at the device level
Internal flash memory used to store configuration data
Fast debugging with DP configuration and network diagnostic software
Easy access to DP-V1 and PA variables from within FDT framework applications
The Molex/Woodhead SST-PFB3-PCI Profibus interface card connects PCI bus computers connected to Profibus DP-V0, DP-V1, and FDL networks. It provides high-speed deterministic communication systems and their decentralized peripherals between automation.
The PFB3 interface card was developed for automation designers and those seeking reliable and high-performance control system communication solutions.

SST-PFB3-VME

SST-PFB3-VME