ICS TRIPLEX T8231 可信电源系统

ICS TRIPLEX T8231 可信电源系统
ICS TRIPLEX T8231 可信电源系统
可信电源系统是一种高密度的灵活电源，设计用于转换110 Vac或240 Vac的干线电压。可信赖产品的输出为24 Vdc或24 Vdc可调现场电源。
可信电源系统由一个带机械支撑的1U电源架组成，包含多达三个750 W的电源组。电源组在使用一个或多个电源架的配置中分担负载。每个电源组都有一个单独的电源连接，通过一个机械保持的交叉型连接器。每个电源架可以提供2250 W的功率或1500 W的功率，n+1元余来自单个电源。可以连接多个单元，以满足进一步的容量或几余要求

T8231

电源组状态的诊断信息通过电源端口提供，该端口连接到电源架的后部。该设备监控输入和输出条件，并使用继电器触点报告超量程故障和超温/风扇故障。电源端口还允许连接可选的机架安装电源控制器，用于输出电压和电流的实时配置，监控4个电源架中多达12个电源组
系统配置工具支持MODBUS TCP的单元ID 0至255
在选择以太网和端口502的情况下配置MODBUS TCP时
如果选择，则可以为单元ID设置0到255范围内的值。
此前，这一数字仅限于1比247。
受信任的工具集套件改进
Trusted中已经实施了许多改进
工具集套件：
•修复了功能框图程序中的错误行为
•修复了复杂密码配置的问题
•修复了许多用户界面问题
Modbus从站，TCP单元标识符的使用
选择了以太网和端口502的MODBUS TCP从机
在0到255范围内的值可以用于单元ID。以前这个
被限制为1比247。
8000系列/CS300混合数字输入单槽热修复
CS300数字输入模块现已通过热修复进行更换

T8231

ICS TRIPLEX T8231 Trusted Power System
ICS TRIPLEX T8231 Trusted Power System
The Trusted Power system is a high density flexible power supply designed to convert main line voltages of 110 Vac or 240 Vac. The output of the trusted product is 24 Vdc or 24 Vdc adjustable field power supply.
The Trusted Power system consists of a mechanically supported 1U power rack containing up to three 750 W power packs. Power packs share the load in a configuration that uses one or more power racks. Each power pack has a separate power connection via a mechanically held cross-type connector. Each power rack can provide 2250 W of power or 1500 W of power, with n+1 yuan remaining from a single power supply. Multiple units can be connected to meet further capacity or redundancy requirements
The diagnostic information about the status of the power supply group is provided through the power port, which is connected to the rear of the power supply rack. The device monitors input and output conditions and uses relay contacts to report overrange failures and overtemperature/fan failures. The power port also allows the connection of an optional rack-mounted power controller for real-time configuration of output voltage and current, monitoring up to 12 power packs in 4 power racks
The system configuration tool supports MODBUS TCP unit ids 0 to 255
When configuring MODBUS TCP with Ethernet and port 502 selected
If selected, you can set a value from 0 to 255 for the cell ID.
Previously, the number was limited to one to 247.
Trusted toolset suite improvements
Many improvements have been implemented in Trusted
Toolset suite:
• Fixed bug behavior in the function block diagram program
• Fixed an issue with complex password configurations
• Fixed many user interface issues
Modbus slave station, TCP unit identifier used
Ethernet and MODBUS TCP slave on port 502 are selected
Values in the range 0 to 255 can be used for cell ids. Previous this
Is limited to 1 to 247.
8000 Series /CS300 Hybrid digital input Single slot hot repair
The CS300 digital input module has now been replaced by hot repair

T8231