T8311 可信 TMR 扩展器接口

制造商：ICS Triplex

产品编号：T8311

产品类型：可信 TMR 扩展器接口

电压范围：20 至 32V dc

散热量：40W

搭配机箱使用：T8300

最大负载：40W

模块时钟：50MHz

扩展器总线数据速率：250Mbps

制造商：ICS Triplex

I/O 接口：扩展机箱背板

工作温度：-5°C 至 60ºC（13°F 至 140°F）

非工作温度：-25°C 至 70ºC（-25°F 至 158°F）

T8311

如果对位置和速度有一定的精度要求，而对实时转矩不是很关心，用速度或位置模式比较好。

如果上位控制器有比较好的闭环控制功能，用速度控制效果会好一点。T8311如果本身要求不是很高，或者基本没有实时性的要求，用位置控制方式对上位控制器没有很高的要求。

对运动中的动态性能有比较高的要求时，需要实时对电机进行调整。

如果控制器本身的运算速度很慢（比如PLC，或低端运动控制器），T8311就用位置方式控制。

如果控制器运算速度比较快，可以用速度方式，把位置环从驱动器移到控制器上，减少驱动器的工作量，提高效率；

TrustedTM TMR T8311扩展器接口模块位于TrustedTM控制器机箱和在控制器机箱中的模块间总线（IMB）和

扩展器总线。扩展器总线允许使用UTP实现多个机箱系统电缆连接，同时保持容错、高带宽IMB功能。

模块为扩展器总线、模块本身和模块中的IMB提供故障遏制

控制器底盘，确保这些潜在故障的影响是局部的，并且系统最大限度地提高可用性。该模块采用Shift TMR体系结构，具有容错性。综合的

诊断、监控和测试可快速识别故障。热备用和模块备用支持插槽配置，允许自动和手动修复策略。

T8311

ICS TRIPLEX T8231 Trusted Power System
ICS TRIPLEX T8231 Trusted Power System
The Trusted Power system is a high density flexible power supply designed to convert main line voltages of 110 Vac or 240 Vac. The output of the trusted product is 24 Vdc or 24 Vdc adjustable field power supply.
The Trusted Power system consists of a mechanically supported 1U power rack containing up to three 750 W power packs. Power packs share the load in a configuration that uses one or more power racks. Each power pack has a separate power connection via a mechanically held cross-type connector. Each power rack can provide 2250 W of power or 1500 W of power, with n+1 yuan remaining from a single power supply. Multiple units can be connected to meet further capacity or redundancy requirements
The diagnostic information about the status of the power supply group is provided through the power port, which is connected to the rear of the power supply rack. The device monitors input and output conditions and uses relay contacts to report overrange failures and overtemperature/fan failures. The power port also allows the connection of an optional rack-mounted power controller for real-time configuration of output voltage and current, monitoring up to 12 power packs in 4 power racks
The system configuration tool supports MODBUS TCP unit ids 0 to 255
When configuring MODBUS TCP with Ethernet and port 502 selected
If selected, you can set a value from 0 to 255 for the cell ID.
Previously, the number was limited to one to 247.
Trusted toolset suite improvements
Many improvements have been implemented in Trusted
Toolset suite:
• Fixed bug behavior in the function block diagram program
• Fixed an issue with complex password configurations
• Fixed many user interface issues
Modbus slave station, TCP unit identifier used
Ethernet and MODBUS TCP slave on port 502 are selected
Values in the range 0 to 255 can be used for cell ids. Previous this
Is limited to 1 to 247.
8000 Series /CS300 Hybrid digital input Single slot hot repair
The CS300 digital input module has now been replaced by hot repair

T8311