T9110 处理器

T9110 处理器

【产品详情】

本手册中的故障诊断程序将针对单个故障找到解决方案。如果您遵循其中一个流程直至其结束，但如果故障指示仍然存在，则存在其他故障。隔离在首次调查期间已删除的故障组件，然后重复故障查找过程。所需工具标准AADvance
AADvance控制器的安装和维护需要以下工具和测试设备:
标准工具螺丝刀，扁0.8。Mm x 9.0 Mm(1/25英寸x 3/8英寸)，用于模块夹紧螺钉和下料盖板平底螺丝刀，0.6 mm x 3.0 mm(1/40英寸x 1/8英寸)，或类似的，将打开接线组件上的保险丝盖·螺丝刀，十字头0，用于9110处理器模块上的电池盖
十字螺丝刀，扁型0.8 mm x 4.0 mm(1/25英寸x 5/32英寸)，用于固定延长线
力矩螺丝刀，扁型0.6 mm x 3.0 mm(1/40英寸x 1/8英寸)，用于直流电源接线端子力矩螺丝刀，扁型0.4 mm x 2.0 mm(1/64英寸x 5/64英寸)，用于现场接线端子
2个扳手，开口，10mm，用于接地螺柱螺母
Allen键(六角扳手)，2.5 mm，用于插头和插座组件与延长电缆
特殊的工具
长嘴钳，用于拆卸终端组件上的保险丝
数字电压表，用于故障排除活动
电阻1k8，用于故障排除模拟输入模块
电阻1k 1W，用于数字输出模块故障排除
电阳250R1W，用于故障排除模拟输出模块

T9110

The troubleshooter in this manual will find a solution for a single fault. If you follow one of these processes until its end, but if the fault indication still exists, there are other faults. Isolate the failed components that were removed during the first survey, and then repeat the troubleshooting process. Required tools standard AADvance
The following tools and test equipment are required for AADvance controller installation and maintenance:
Standard tools Screwdriver, 0.8 flat. Mm x 9.0 Mm(1/25 “x 3/8”) Flat-bottom screwdriver for module clamping screws and blanking covers, 0.6 mm x 3.0 mm(1/40 “x 1/8”), or similar, will open the fuse cover on the wiring assembly · Screwdriver, cross head 0, For the battery cover on the 9110 processor module
Phillips screwdriver, flat 0.8 mm x 4.0 mm(1/25 inch x 5/32 inch), used to secure extension cables
Torque screwdriver, flat 0.6 mm x 3.0 mm(1/40 inch x 1/8 inch), used for DC power terminal Torque screwdriver, flat 0.4 mm x 2.0 mm(1/64 inch x 5/64 inch), used for field terminal
2 wrenches, open, 10mm, for grounding stud nuts
Allen key (hex wrench), 2.5 mm, for plug and socket assemblies with extension cables
Special tool
Long nose pliers used to remove fuses from terminal components
Digital voltmeter for troubleshooting activities
Resistance 1k8 for the troubleshooting analog input module
Resistance 1k 1W for troubleshooting of digital output module
Positive 250R1W, used for troubleshooting analog output module

T9110