TSXPBY100 Schneider 电气化学组件

Frofibus DF 总线是一种现场总线，符合工业通讯要求。
TSXPBY100是Schneider生产的电气化学组件，用于测量有毒和无毒气体，如一氧化碳、氧气和氢气等。
电气化学组件通常基于化学氧化与化学还原的主要方法，并产生与被测气体成比例的电流。TSXPBY100电气化学组件由三个电极组成，即工作极（WE）、计数器极（CE）和基准极（RE）。其中，WE氧化或者还原目标气体，然后产生一个与气体浓度成比例关系的电流；CE平衡所产生的电流；RE则维持工作电极电位，保证正确的工作区。

TSXPBY100

Frofibus 总线是一种操作过程集中化的主/从式线性总线。这种模式下，只有主工作站，或称活动工作站，才拥有对总线的访问权限从站或无源工作站只能对提示作出响应。通过令牌总线协议，不同主机之间也可实现互相通讯。物理连接采用的是单层屏蔽双统线，但也通过光纤接口来实现树形、星形或环形结构。因为用户界面的数据是通过简单的变里映射直接连接到数据路层的，所以这种总线和IS0网络模型不同，它只实现了第1、2 两层。
配
Profibus DP 总线应当由sycon 软件配置，这需要单独定购，型号是:SYC SPV LF*CD29M。这个软件可生成特定文件，文件中含有关于网络上所连设备的信息。这套扩展文件可通过umity Fr编程软件导入到PC应用程序中去

TSXPBY100

The Frofibus DF bus is a field bus that meets the requirements of industrial communication.
TSXPBY100 is an electrochemical component manufactured by Schneider for the measurement of toxic and non-toxic gases such as carbon monoxide, oxygen and hydrogen.
The electrochemical components are usually based on the main methods of chemical oxidation and chemical reduction and produce an electric current proportional to the gas being measured. The TSXPBY100 electrochemical assembly consists of three electrodes, namely, the working pole (WE), the counter pole (CE) and the reference pole (RE). Where WE oxidize or reduce the target gas, and then generate a current proportional to the gas concentration; The current generated by CE balance; RE maintains the working electrode potential to ensure the correct working area.

Frofibus is a master/slave linear bus with centralized operation process. In this mode, only the primary, or active, workstation has access to the bus and the secondary or passive workstation can only respond to prompts. Through the token bus protocol, different hosts can also communicate with each other. The physical connection uses a single shielded dual line, but also through the fiber interface to achieve a tree, star or ring structure. Because the user interface data is directly connected to the data path layer through a simple variable mapping, this bus is different from the IS0 network model, which only implements layers 1 and 2.
with
The Profibus DP bus should be configured by sycon software, which needs to be ordered separately, model number :SYC SPV LF*CD29M. This software generates specific files that contain information about the devices connected to the network. This set of extensions can be imported into a PC application using the umity Fr programming software

TSXPBY100