MVI56-PDPS Prosoft 通讯模块 处理器

MVI56-PDPS被识别为输入/输出模块，并且可以访问处理器内存以在处理器和模块之间传输数据该模块支持使用罗克韦尔自动化以太网接口通过以太网路由与ProSoft ConfigurationBuilder和FDT comDTM进行通信。此外，它还具有配置/调试串行端口，可以将PC连接到模块以进行配置、状态、监控和故障排除。
MVI56-PDPS模块支持符合 IEC 61158 的完整主站规范。非循环参数数据可通过 1 或2类 DPV1 服务进行传输，使处理器能够轻松与支持 PROFIBUS DPVO/V1 协议的从站设备进行通信。
MVI56-PDPS模块充当 PROFIBUS 网络和 ControlLogix 处理器之间的输入/输出模块。来自处理器的数据传输与 PROFIBUS 网络上的/0 数据传输异步。数据库是用户定义的并存储在模块中以保存协议所需的数据。

MVI56-PDPS

The MVI56-PDPS is recognized as an input/output module and has access to processor memory to transfer data between the processor and the module. The module supports communication with ProSoft ConfigurationBuilder and FDT comDTM via Ethernet routing using the Rockwell Automation Ethernet interface. In addition, it has a configuration/debug serial port that connects a PC to a module for configuration, status, monitoring, and troubleshooting.
The MVI56-PDPS module supports the complete master station specification according to IEC 61158. Acyclic parameter data can be transmitted via Class 1 or 2 DPV1 services, enabling the processor to easily communicate with slave devices that support the PROFIBUS DPVO/V1 protocol.
The MVI56-PDPS module acts as an input/output module between the PROFIBUS network and the ControlLogix processor. The data transfer from the processor is asynchronous with the /0 data transfer on the PROFIBUS network. The database is user-defined and stored in the module to hold the data required by the protocol.

MVI56-PDPS

其他型号推荐：

MVI56-PDPS